Home About Us Injection Moulding Machines Periphery Spare-Parts Stock Adress Contact Links
Stork SX 2500 - 2100
| Details |
| Manufacturer: | Stork |
| Type of machine: | SX 2500 - 2100 |
| Year: | 1995 |
| Delivery time: | Immediately |
| Terms of Delivery: | EX Works |
| Location: | Awans - Belgium |
| Controlversion: | CDS - 500 |
| Screen text: | Dutch |
| Operating hours: | 53.839 |
| Price: | on request |
Technical details
| Clamping unit | |
|---|---|
| Clamping force: | 2.500 kN |
| Mould opening force, max.: | kN |
| Size of mould platens (h x v): | mm x mm |
| Distance between tie bars (h x v): | 585 mm x 585 mm |
| Mould opening stroke: | 575 mm |
| Mould height min.: | 200 mm |
| Mould height max.: | 550 mm |
| Max daylight: | 1225 mm |
| Hydraulic ejector - stroke: | mm |
| Ejector force forward/backward: | kN |
| Injection unit | |
|---|---|
| Screw diameter: | 72 mm PE II |
| Ls/D ratio: | |
| Injection pressure: | 1600 bar |
| Stroke volume: | 1.283 ccm |
| Shot weight, PS: | 1.218 g |
| Injection rate: | ccm/s |
| Injection stroke: | mm |
| Screw speed: | 1/min |
| Plasticising rate max.: | g/s |
| Nozzle pressure: | kN |
| Electric and Hydraulic Equipment | |
|---|---|
| Nominal capacity of pump motor: | kW |
| Installed heating capacity: | kW |
| Adjustable barrel heating zones: | |
| Dry cycle time: | sec |
| Reservoir capacity: | 720 ltr. |
| Dimensions und weights | |
|---|---|
| Dimensions of the machine ca.: | m x m x m |
| Total machine weight: | 13.600kg |
| Accessories | |
|---|---|
| - Anti vibration pads |
| Additional information | |
|---|---|
| - PE-II screw - Bigger oil cooler - Drop out protection - Automatic mould height adjustment - Air ejectors ( 6 valves) - Free programmable air ejectors - Accumulators for higher injection speed |
| Picture |
|---|
