Home About Us Injection Moulding Machines Periphery Spare-Parts Stock Adress Contact Links
Stork SXS 1500 / 800
| Details |
| Manufacturer: | Stork |
| Type of machine: | SXS 1500 / 800 |
| Year: | 1997 |
| Delivery time: | Immediately |
| Terms of Delivery: | EX Works |
| Location: | Awans - Belgium |
| Controlversion: | IPC-500 |
| Screen text: | Dutch |
| Operating hours: | |
| Price: | on request |
Technical details
| Clamping unit | |
|---|---|
| Clamping force: | 1500 kN |
| Mould opening force, max.: | 87 kN |
| Size of mould platens (h x v): | mm x mm |
| Distance between tie bars (h x v): | 470 mm x 470 mm |
| Mould opening stroke: | 480 mm |
| Mould height min.: | 150 mm |
| Mould height max.: | 450 mm |
| Max daylight: | 930 mm |
| Hydraulic ejector - stroke: | 150 mm |
| Ejector force forward/backward: | 22 kN |
| Injection unit | |
|---|---|
| Screw diameter: | 45 mm PE II |
| Ls/D ratio: | 23,1 |
| Injection pressure: | 2100 bar |
| Stroke volume: | 374 ccm |
| Shot weight, PS: | 355 g |
| Injection rate: | 1990 ccm/s |
| Injection stroke: | 235 mm |
| Screw speed: | 340 1/min |
| Plasticising rate max.: | 32 g/s |
| Nozzle pressure: | 30 kN |
| Electric and Hydraulic Equipment | |
|---|---|
| Nominal capacity of pump motor: | 55 kW |
| Installed heating capacity: | 18 kW |
| Adjustable barrel heating zones: | 5+1 |
| Dry cycle time: | 1,23 sec |
| Reservoir capacity: | 600 ltr. |
| Dimensions und weights | |
|---|---|
| Dimensions of the machine ca.: | 5,6 m x 1,73 m x 2,45 m |
| Total machine weight: | 8.600kg |
| Accessories | |
|---|---|
| - Anti vibration pads - 5 x Air valve - Robot interface |
| Additional information | |
|---|---|
| --PE-II screw -Bigger oil cooler -Polymac interface -Air ejector (5 valves) -Drop out protection -Accumulator for higher injection speed -Ejector on limit switches or potentiometer |
| Picture |
|---|