Home About Us Injection Moulding Machines Periphery Spare-Parts Stock Adress Contact Links
Stork SXS 4400 / 3350
| Details |
| Manufacturer: | Stork |
| Type of machine: | SXS 4400 / 3550 |
| Year: | 2003 |
| Delivery time: | Immediately |
| Terms of Delivery: | EX Works |
| Location: | Awans - Belgium |
| Controlversion: | CDS 500 |
| Screen text: | Dutch |
| Operating hours: | 23.633 |
| Price: | on request |
Technical details
| Clamping unit | |
|---|---|
| Clamping force: | 4400 kN |
| Mould opening force, max.: | 285 kN |
| Size of mould platens (h x v): | 1090 mm x 1090 mm |
| Distance between tie bars (h x v): | 730 mm x 730 mm |
| Mould opening stroke: | 720 mm |
| Mould height min.: | 200 mm |
| Mould height max.: | 720 mm |
| Max daylight: | 1400 mm |
| Hydraulic ejector - stroke: | 250 mm |
| Ejector force forward/backward: | 94 kN |
| Injection unit | |
|---|---|
| Screw diameter: | 72 mm |
| Ls/D ratio: | 23.3 |
| Injection pressure: | 2100 bar |
| Stroke volume: | 1547 ccm |
| Shot weight, PS: | 1470 g |
| Injection rate: | 2443 ccm/s |
| Injection stroke: | 380 mm |
| Screw speed: | 254 1/min |
| Plasticising rate max.: | 78 g/s |
| Nozzle pressure: | 71 kN |
| Electric and Hydraulic Equipment | |
|---|---|
| Nominal capacity of pump motor: | 110 kW |
| Installed heating capacity: | 33 kW |
| Adjustable barrel heating zones: | 1+5 |
| Dry cycle time: | 2,5 sec |
| Reservoir capacity: | 1350 ltr. |
| Dimensions und weights | |
|---|---|
| Dimensions of the machine ca.: | 9,54 m x 1,73 m x 2,34 m |
| Total machine weight: | 21.300 kg |
| Dimension clamping unit: | 4,5 m x 2,48 m x 2,46 m |
| Clamping unit - weight: | 14.700 kg |
| Dimension injection unit: | 4,8 m x 2,00 m x 2,4 m |
| Injection unit - weight: | 6.600 kg |
| Accessories | |
|---|---|
| - Anti vibration pads - hopper - |
| Additional information | |
|---|---|
| -PE-II screw -Hydraulic plate ejector -Extended door operator side (250 mm) -Air-ejector (5-valves) free programmable -Robot interface -Hydraulic shut off nozzle -Single core-puller -Free programmable core puller -Hotrunner (12 circuits) -Ejector on limit switches/potentiometer -Mould contact
|
| Picture |
|---|
