Home About Us Injection Moulding Machines Periphery Spare-Parts Stock Adress Contact Links
Krauss Maffei KM 1600 - 17200 MX
| Details |
| Offer details | |
|---|---|
| Manufacturer: | Krauss Maffei |
| Type of machine: | KM 1600 - 17200 MX |
| Year: | 2005 |
| Delivery time: | Immediately |
| Terms of Delivery: | EX Works |
| Location: | Germany |
| Controlversion: | MC 5 |
| Screen text: | German |
| Operating hours: | 24000 h |
| Price: | on request |
Technical details
| Clamping unit | |
|---|---|
| Clamping force: | 16000 kN |
| Mould opening force, max.: | 1120 kN |
| Travel force movable platen Opening: | 159 kN |
| Travel force movable platen Closing: | 153 kN |
| Size of mould platens (h x v): | 2500 mm x 2100 mm |
| Distance between tie bars (h x v): | 1850 mm x 1400 mm |
| Mould opening stroke: | 2700 mm |
| Mould height min.: | 1000 mm |
| Mould height max.: | 1600 mm |
| Max daylight: | 3700 mm |
| Hydraulic ejector - stroke: | 350 mm |
| Ejector force forward/backward: | 300/150 kN |
| Injection unit | |
|---|---|
| Screw diameter: | 120 mm |
| Ls/D ratio: | 23 |
| Injection pressure: | 2258 bar |
| Stroke volume: | 7634 ccm |
| Shot weight, PS: | 6947 g |
| Injection rate: | 1019 ccm/s |
| Screw speed: | 113 1/min |
| Plasticising rate max.: | 136 g/s |
| Nozzle pressure: | 241 kN |
| Electric and Hydraulic Equipment | |
|---|---|
| Nominal capacity of pump motor: | 160 kW |
| Installed heating capacity: | 85 kW |
| Adjustable barrel heating zones: | 7 |
| Dry cycle number: | 640 1/h |
| Dry cycle time: | 5,6 sec |
| Reservoir capacity: | 2500 ltr. |
| Dimensions und weights | |
|---|---|
| Dimensions of the machine ca.: | 14,34 m x 4,01 m x 2,93 m |
| Total machine weight: | 110000 kg |
| Max. mould weight: | 43000 kg |
| Accessories | |
|---|---|
| - Anti vibration pads - incl. Krauss Maffei Robot Type LR 500 Year 2005 X: 2000 mm Y: 1220/1250 mm Z: 5000 mm C: 0-90° |
| Additional information | |
|---|---|
| - 6 x hydraulic sequentional
valves - Interface for Gas injection - 3 x cores on movable plate - 3 x cores on fix plate - 36 x hot runner controller - magnetic plates for mould fixing - Tiebar pull on nonoperator side - mechanical interface for Bolt-on-injection unit 390 in L-Position |
| Picture |
|---|
