Home About Us Injection Moulding Machines Periphery Spare-Parts Stock Adress Contact Links
Krauss Maffei KM 130 - 380 CX
| Details |
| Manufacturer: | Krauss Maffei |
| Type of machine: | KM 130 - 380 CX |
| Year: | 2008 |
| Delivery time: | Immediately |
| Terms of Delivery: | Ex - Works |
| Location: | Eschweiler - Germany |
| Controlversion: | MC5 |
| Screen text: | German |
| Price: | on request |
Technical details
| Clamping unit | |
|---|---|
| Clamping force: | 1300 kN |
| Mould opening force, max.: | 70 kN |
| Travel force movable platen Opening: | 35,4 kN |
| Travel force movable platen Closing: | 31,4 kN |
| Size of mould platens (h x v): | 840 mm x 840 mm |
| Distance between tie bars (h x v): | 530 mm x 530 mm |
| Mould opening stroke: | 600 mm |
| Mould height min.: | 300 mm |
| Max daylight: | 900 mm |
| Hydraulic ejector - stroke: | 150 mm |
| Ejector force forward/backward: | 22,6 / 9,9 kN |
| Injection unit | |
|---|---|
| Screw diameter: | 40 mm |
| Ls/D ratio: | 23 |
| Injection pressure: | 1860 bar |
| Stroke volume: | 201 ccm |
| Shot weight, PS: | 183 g |
| Injection rate: | 377 ccm/s |
| Screw speed: | 390 1/min |
| Plasticising rate max.: | 25 g/s |
| Nozzle pressure: | 50 kN |
| Electric and Hydraulic Equipment | |
|---|---|
| Nominal capacity of pump motor: | 18,5 kW |
| Installed heating capacity: | 8,12 kW |
| Adjustable barrel heating zones: | 5 |
| Dry cycle number: | 1700 1/h |
| Dry cycle time: | 2,1 sec |
| Reservoir capacity: | 489 ltr. |
| Dimensions und weights | |
|---|---|
| Dimensions of the machine ca.: | 4,30 m x 1,6 m x 2,1 m |
| Total machine weight: | 5600 kg |
| Max. mould weight: | 1485 kg |
| Accessories | |
|---|---|
| - Anti vibration pads |
| Additional information | |
|---|---|
| - Hydr. screw drive with standard speed - Pneumatic valve 3 on moving platen - Mechanical robot interface according to EUROMAP 18 - Increased oil cooler for water intake temperature of max. 31 °C - Pressure accumulator for increased injection capacity and independent movements of ejectors / core pulls during opening and closing movements as well as holding of the cores during the injection process - Hydraulic core pull system 2-fold - Watter battery 6-fold - 8 hotrunner control circuits - Signal interface for handling unit acc. to EUROMAP 67 incl. reject signal and power socket CEE 32A - 2 x watter battery 6-fold |
| Picture |
|---|
